|
ExpertShield Crystal Clear Protective Film (ES-CCPF) consists of 1) a scratch-resistant PET layer and 2) a residue-free Silicone Gel Solution layer. The Silicone Gel Solution uses a patented formula that creates an air vacuum between the bonded substrate (PET film) and any smooth surface.
The successful result of a glass-like finish is dependent on the consistency of the Silicone Gel Solution and its even distribution against the substrate. The process of bonding the Silicone Gel Solution to the PET is inherently difficult and requires a dust-free environment and precision machinery. There are two main processing plants that supply ExpertShield with this process – both located in Japan and both adhering to the strictest quality standards.
Features:
Anti-scratch – Designed to be used with a Stylus or other pointed objects.
No air-bubbles – PET will cling smoothly in the absence of dust / dirt or oils (fingerprints).
High Transparency – Glass-like finish when applied successfully.
Reusable – Designed to be applied and re-applied without loss of “vacuum effect” as long as there are no contaminants on the Silicone Gel Solution Layer.
No residue – No marks or residue will be left on the surface when removed.
Easy Removal – The PET is easily removed by releasing the air vacuum which can be done by 1) using a piece of strong adhesive to lift one of the corners or 2) by sliding a thin piece of plastic polymer between the PET and the device (remember that there is only an air vacuum and NO ADHESIVE, thus there always a micro gap between the PET and the surface).
|
